For the final titanium 41mm, three-hands limited edition with rubber strap, Romain Gauthier presents a timepiece with a partially open dial, unveiling a portion of the entirely hand-decorated movement.

C by Romain Gauthier Titanium Editions are modern timepieces with a sporty design that encloses a titanium movement whose hand-finishing prowess can be admired on the case-back. This time Romain wanted the stunning features of this movement to be easily visible just by looking at the watch, even when worn. By opening the dial, he reveals the beauty of the mechanism inside, bringing a technical aesthetic to this timepiece, which until now has featured a full dial.

This partially open dial is particularly reminiscent of the history of the brand's very first timepiece, the Prestige HM, which evolved to reveal the seconds-hand mechanism on its sister caliber, the Prestige HMS.

Unveiled in 2021, the C by Romain Gauthier caliber was the result of more than 16 years of know-how acquired through the brand's development and its manufacture, while reflecting Romain's creative freedom with a modern and youthful design.

Technical in nature, casual in style and free in spirit, the Freedom collection has enabled the creation of this contemporary caliber. The significance of C by Romain Gauthier lies in its creative approach to reinforce the notions of continuity with its concept and design, in reference to the Continuum. Reflecting a vision of the future for a timepiece which is part of Romain Gauthier's philosophy, and which opens the door to new horizons.

During its creation, it was clear to Romain that the case had to harmonize with the movement. It had to be contemporary and uncluttered. But not only that – comfort, ergonomics and the choice of materials also contributed to the design of this timepiece with the decision to use Grade 5 titanium. The dial, in sapphire for this edition, adds to the consistency of the piece and evokes a sense of continuity, as no circle completes the time indication.

Inspired by the finger bridges style, the design of the movement follows the watchmaking history of the Vallée de Joux but with a modern approach, reflecting Romain’s vision of the evolution of tradition.

Romain Gauthier presents the sixth edition of the caliber in titanium in a limited edition of 88-pieces and engraved “1 of 88” on the back of each movement.

Released initially with a grey dial and then with a Lever de Soleil color dial, the C by Romain Gauthier Titanium Edition Bracelet is now featured with two new dials: a three-dimensional straight grained structured dial in Grade 5 black titanium with white details and a black sapphire openwork dial with blue and white accents.

The three-dimensional straight grained black titanium dial provides an even more assertive character with its textured surfaces. The sharp contrast between the white details and the dark background enhances the time indications. This dial embodies a distinctly modern design while maintaining excellent readability, even in low-light conditions, thanks to the use of Super- LumiNova on the indexes, numerals, and hands.

As for the sapphire openwork dial, it reveals the intricate components of the movement, showcasing the brand's sophisticated watchmaking engineering and artisanal craftsmanship. This openwork design creates a captivating interplay between transparency and structure, transforming the watch into a true technical and aesthetic masterpiece. When Romain launched the first edition of C by Romain Gauthier in 2021, it was clearly stated that this new caliber would lead the brand to new horizons. One year later, a new door has been opened with the arrival of the brand's first metal bracelet.

Sober and contemporary, propitious to variations and adaptations, C by Romain Gauthier was an obvious choice for the creation of a metal bracelet. The desire of modernity, comfort and ergonomic already initiated during the conception of the first edition, reinforced the development of this integral timepiece on a titanium bracelet - light, resistant, modern and sophisticated. Aesthetically, it was important to Romain that the bracelet and the watch become one. As he said: "The bracelet is the case, and the case is the bracelet". This desire is reflected in the fusion of these two elements, a timepiece as a whole that cannot be dissociated.

In keeping with Romain's vision - The Evolution of Tradition - this new technical and contemporary element requires a high level of craftsmanship and hand finishing. Each link is composed of hand-polished and satin-finished surfaces that play with the light and reflect the technical nature of the bracelet and the piece in general.

A harmoniously arranged skeletonised calibre with an evolved and subtle watchmaking style. Arnold & Son has reworked its Nebula collection, giving it a more striking case with a universal diameter of 40 mm while retaining its remarkably finished movement and unique abundance of watchmaking tradition. Two versions – one with a rhodium-plated and black calibre, the other with golden accents – ensure that the Nebula 40 Steel shines bright. The aesthetics of the Nebula collection are unlike any other skeleton: its structure conveys watchmaking spirit, its style expresses unique elegance, and the overall effect is one of outstanding finesse.

The case of the Nebula collection has been redesigned, modernised and refined. With streamlined lugs, a softly rounded bezel, a more vertical case middle and a diameter of 40 mm in harmony with its thickness of just 9.10 mm, this steel case opens a new chapter for the collection. Featuring the A&S5201 skeletonised calibre offering an ultra-graphic layout, Nebula retains its identity as a watch whose movement fascinates, captivates and draws the eye into its depths.

Time is not just seen—it is heard.

Chronoswiss presents the Q-Repeater Scream and Q-Repeater Blue Note, two extraordinary Quarter Repeater timepieces that merge the sonic beauty of timekeeping with cutting-edge mechanical architecture. The watchmakers from Lucerne have created a bold reinvention of sound, design, and independent watchmaking deeply rooted in Chronoswiss history. Housed in a Grade 5 titanium case, these 42mm skeletonized masterpieces reveal the intricate mechanisms behind their chiming complication. Every press of the 10 o’clock pusher activates the mesmerizing quarter repeater function, where hammers strike to audibly indicate the hours and quarter-hours, making time a true sensory experience. At its core lies a legacy movement, rooted in the vision of Chronoswiss founder Gerd-Rüdiger Lang. First introduced in the 1990s and exclusively produced for Chronoswiss, this legacy caliber has been taken from our archives, meticulously restored, refined, and reborn in the Atelier Lucerne, making these two timepieces an extraordinary link between the past and the future.

What the watchmakers of Lucerne have achieved here is the ultimate evolution—the heart beats with the legacy of the past, carrying its passion and memories, while the body is Modern Mechanical, engineered for the next century and beyond.

Q-Repeater Scream – A Chiming Rebel
This is not your grandfather’s repeater. The Q-Repeater Scream is a wild, untamed spectacle—combining bold design and mechanical precision unlike anything in watchmaking. The multi-level dial is a skeletonized stage and at the same time part of the movement, where CVD-coated bridges in electric blue, orange, and purple hold the Paraiba green minute ring, the floating hour, as well as the small seconds rings. At 1 o’clock, the heart of this spectacle is fully visible: the striking hammers, set to release a mechanical rock concert at the press of a button.

As you can tell by the name already, it’s not just about what you see. It’s about what you hear. Every chime is a scream of innovation, breaking free from the traditions of classical repeater watches. Even the legacy movement itself becomes part of the gig, holding the Super-LumiNova blocks and hand-guilloché bridges—one of which moves when the mechanism is activated, adding to the dynamic energy of the dial. The watchmakers of Lucerne refer to the glowing ceramic blocks as “chicken heads”, a nod to the iconic amplifier knobs found on rock concert stages—designed to crank up the sound and electrify the crowd.

Caged in 42mm of titanium, the Q-Repeater Scream is limited to just 25 pieces. As only very few of the legacy movements exist this might be the final tour of the band. Each piece is a testament to mechanical defiance and unfiltered artistry. A Quarter Repeater like no other— built for collectors who dare to embrace the wild side of watchmaking.

Q-Repeater Blue Note – The Sound of Elegance
For those who seek a symphony rather than rock n roll, the Q-Repeater Blue Note takes a more refined yet equally innovative approach. Inspired by the expressive power of jazz and blues, the navy blue CVD-coated skeletonized dial and bridges which are part of the movement, play on contrasts with a silver hour ring and luminous white Super-LumiNova markers, creating a harmonious composition of mechanics and design.

In music, a blue note is an altered pitch—intentionally deviating from the standard, creating a sound that is richer, deeper, and full of soul. One could say – the Chronoswiss way of making watches – and music. The Q-Repeater Blue Note embodies this philosophy, blending traditional watchmaking with a contemporary edge, offering a timeless yet unconventional melody of time.

Like the Scream, the Blue Note features the multi-level regulator dial, a fully visible quarter repeater mechanism, and a restored historical movement, revised and refined by thewatchmakers in Lucerne. It is a timepiece that doesn’t just mark time—it composes it.

Time Reimagined, Sound Reinvented
The Q-Repeater Scream and Q-Repeater Blue Note stand as testaments to Chronoswiss’ relentless drive to push boundaries. With only 25 pieces per model, these Quarter Repeaters are more than just rare; they are audible declarations of mechanical mastery.

This is not just a watch. It is an experience. A fusion of sound and time, crafted for those who appreciate the extraordinary. Chronoswiss has never followed the expected path. The future of independent watchmaking starts here—with a chime.

Chronoswiss is thrilled to announce the launch of its latest horological marvel, the Delphis Sub Zero. This all-blue wonder is a testament to the eternal beauty of ice and glaciers, merging innovative design with meticulous craftsmanship – with a cool twist.

The Delphis Sub Zero is an extraordinary timepiece encased in a 42mm CVD-coated blue stainless-steel case, perfectly complemented by a matching blue rubber strap. This icy blue ensemble creates a striking visual that is both bold and sophisticated, like an explorer of the frozen wilderness, capturing the essence of eternal ice.

A timepiece focused on the essential—yet anything but ordinary.

Chronoswiss proudly introduces the Small Second, the beginning of a new family in the Modern Mechanical collection. The vision? To create a bold mechanical timepiece, stripped of excess yet rich in craftsmanship and detail.

With its 40mm stainless steel case and slim 11.5mm profile, the Small Second is the sleekest Chronoswiss in the current collection. Designed with refinement and precision, the case features polished sides, sandblasted & sculpted lugs, as well as the most streamlined crown the watchmakers of Lucerne have ever created. Every detail serves a purpose, ensuring a fascinating mechanical experience.

Yet, focusing on the true essence does not mean compromise. The curved dial construction, intricate 3D layering, and handcrafted dials transform the Small Second into a study of watchmaking complexity.

At its heart beats the Chronoswiss Manufacture Caliber C.6000—ensuring precision, reliability, and the unmistakable rhythm of a true mechanical timepiece.

Instrument de Vitesse, a new opus in the La Fabrique collection, revives the golden age of timed races. This single push-piece chronograph seems to have been plucked from the dashboard of a vintage GT car. It is equipped with a single timing hand – the centre seconds hand – and can time a maximum of one minute. With its sleek and refined retro sports look, Instrument de Vitesse is intended for enthusiasts of watchmaking history and culture. Housed in a 39-mm steel case, its 4.20 mm manually wound Manufacture calibre ensures that the finished timepiece is less than 10 mm thick. Instrument de Vitesse is available with an ivory-white or ebony-black dial in two limited series of 25 timepieces each.

Appearances can sometimes be deceptive. At first glance, Instrument de Vitesse does not appear to be a classic chronograph. With its three central hands, it looks like a watch... with three hands, but the tachymeter scale running around the outer edge of the dial reveals its chronometric function. For this is a chronograph presented in its purest expression, dedicated to timing short bursts – a measuring instrument designed to take average speed readings over a maximum of 60 seconds. This, in turn, casts new light on the crown, which also acts as the chronograph’s single push-piece to set the slender centre seconds hand in motion.