For the final titanium 41mm, three-hands limited edition with rubber strap, Romain Gauthier presents a timepiece with a partially open dial, unveiling a portion of the entirely hand-decorated movement.

C by Romain Gauthier Titanium Editions are modern timepieces with a sporty design that encloses a titanium movement whose hand-finishing prowess can be admired on the case-back. This time Romain wanted the stunning features of this movement to be easily visible just by looking at the watch, even when worn. By opening the dial, he reveals the beauty of the mechanism inside, bringing a technical aesthetic to this timepiece, which until now has featured a full dial.

This partially open dial is particularly reminiscent of the history of the brand's very first timepiece, the Prestige HM, which evolved to reveal the seconds-hand mechanism on its sister caliber, the Prestige HMS.

Unveiled in 2021, the C by Romain Gauthier caliber was the result of more than 16 years of know-how acquired through the brand's development and its manufacture, while reflecting Romain's creative freedom with a modern and youthful design.

Technical in nature, casual in style and free in spirit, the Freedom collection has enabled the creation of this contemporary caliber. The significance of C by Romain Gauthier lies in its creative approach to reinforce the notions of continuity with its concept and design, in reference to the Continuum. Reflecting a vision of the future for a timepiece which is part of Romain Gauthier's philosophy, and which opens the door to new horizons.

During its creation, it was clear to Romain that the case had to harmonize with the movement. It had to be contemporary and uncluttered. But not only that – comfort, ergonomics and the choice of materials also contributed to the design of this timepiece with the decision to use Grade 5 titanium. The dial, in sapphire for this edition, adds to the consistency of the piece and evokes a sense of continuity, as no circle completes the time indication.

Inspired by the finger bridges style, the design of the movement follows the watchmaking history of the Vallée de Joux but with a modern approach, reflecting Romain’s vision of the evolution of tradition.

Romain Gauthier presents the sixth edition of the caliber in titanium in a limited edition of 88-pieces and engraved “1 of 88” on the back of each movement.

Time is not just seen—it is heard.

Chronoswiss presents the Q-Repeater Scream and Q-Repeater Blue Note, two extraordinary Quarter Repeater timepieces that merge the sonic beauty of timekeeping with cutting-edge mechanical architecture. The watchmakers from Lucerne have created a bold reinvention of sound, design, and independent watchmaking deeply rooted in Chronoswiss history. Housed in a Grade 5 titanium case, these 42mm skeletonized masterpieces reveal the intricate mechanisms behind their chiming complication. Every press of the 10 o’clock pusher activates the mesmerizing quarter repeater function, where hammers strike to audibly indicate the hours and quarter-hours, making time a true sensory experience. At its core lies a legacy movement, rooted in the vision of Chronoswiss founder Gerd-Rüdiger Lang. First introduced in the 1990s and exclusively produced for Chronoswiss, this legacy caliber has been taken from our archives, meticulously restored, refined, and reborn in the Atelier Lucerne, making these two timepieces an extraordinary link between the past and the future.

What the watchmakers of Lucerne have achieved here is the ultimate evolution—the heart beats with the legacy of the past, carrying its passion and memories, while the body is Modern Mechanical, engineered for the next century and beyond.

Q-Repeater Scream – A Chiming Rebel
This is not your grandfather’s repeater. The Q-Repeater Scream is a wild, untamed spectacle—combining bold design and mechanical precision unlike anything in watchmaking. The multi-level dial is a skeletonized stage and at the same time part of the movement, where CVD-coated bridges in electric blue, orange, and purple hold the Paraiba green minute ring, the floating hour, as well as the small seconds rings. At 1 o’clock, the heart of this spectacle is fully visible: the striking hammers, set to release a mechanical rock concert at the press of a button.

As you can tell by the name already, it’s not just about what you see. It’s about what you hear. Every chime is a scream of innovation, breaking free from the traditions of classical repeater watches. Even the legacy movement itself becomes part of the gig, holding the Super-LumiNova blocks and hand-guilloché bridges—one of which moves when the mechanism is activated, adding to the dynamic energy of the dial. The watchmakers of Lucerne refer to the glowing ceramic blocks as “chicken heads”, a nod to the iconic amplifier knobs found on rock concert stages—designed to crank up the sound and electrify the crowd.

Caged in 42mm of titanium, the Q-Repeater Scream is limited to just 25 pieces. As only very few of the legacy movements exist this might be the final tour of the band. Each piece is a testament to mechanical defiance and unfiltered artistry. A Quarter Repeater like no other— built for collectors who dare to embrace the wild side of watchmaking.

Q-Repeater Blue Note – The Sound of Elegance
For those who seek a symphony rather than rock n roll, the Q-Repeater Blue Note takes a more refined yet equally innovative approach. Inspired by the expressive power of jazz and blues, the navy blue CVD-coated skeletonized dial and bridges which are part of the movement, play on contrasts with a silver hour ring and luminous white Super-LumiNova markers, creating a harmonious composition of mechanics and design.

In music, a blue note is an altered pitch—intentionally deviating from the standard, creating a sound that is richer, deeper, and full of soul. One could say – the Chronoswiss way of making watches – and music. The Q-Repeater Blue Note embodies this philosophy, blending traditional watchmaking with a contemporary edge, offering a timeless yet unconventional melody of time.

Like the Scream, the Blue Note features the multi-level regulator dial, a fully visible quarter repeater mechanism, and a restored historical movement, revised and refined by thewatchmakers in Lucerne. It is a timepiece that doesn’t just mark time—it composes it.

Time Reimagined, Sound Reinvented
The Q-Repeater Scream and Q-Repeater Blue Note stand as testaments to Chronoswiss’ relentless drive to push boundaries. With only 25 pieces per model, these Quarter Repeaters are more than just rare; they are audible declarations of mechanical mastery.

This is not just a watch. It is an experience. A fusion of sound and time, crafted for those who appreciate the extraordinary. Chronoswiss has never followed the expected path. The future of independent watchmaking starts here—with a chime.

This is not just a new timepiece — it’s a statement, a revolution, a new era. The PULSE One is the first of its kind, the birth of a new family, and most importantly, the bold next step in the Chronoswiss legacy.

Designed and crafted in Lucerne, this is "Modern Mechanical" in its purest form. Known for defying convention, the watchmakers at Chronoswiss have once again pushed the boundaries of mechanical artistry. For Watches & Wonders 2025, Chronoswiss has re- visioned, re-engineered, and redefined its core DNA. The result? A full-titanium powerhouse that pulses with precision, energy, and audacity - a true mechanical marvel forged by hand.

Independent Swiss watch manufacture Armin Strom is expanding its Tribute collection with the new Tribute2, featuring a distinctive open worked design and remarkable three-dimensionality. The visible mechanical elements of the innovative movement and the elaborate hand decorations impart an intriguing visual depth to the watch. The Tribute2 – Copper Edition features a mainplate with a distinctive grattage design in an elegant copper hue. Limited to just 10 pieces, this edition underscores Armin Strom’s commitment to exceptional craftsmanship and exclusivity.
 

“The Tribute2 builds on the success of the Tribute 1 launched in 2021. It merges traditional watchmaking with contemporary design, highlighting the core values of the brand: transparent mechanics that artfully display the inner mechanisms, three-dimensional design that provides visual depth through various levels and the intricate details of the movement and meticulous hand decoration, which features prominently in this timepiece.” – Claude Greisler, Co-Founder and Master Watchmaker at Armin Strom.
 

From the heart of Lucerne, the esteemed watchmakers at Chronoswiss are thrilled to announce the launch of three extraordinary timepieces that are set to revolutionize the luxury watchmaking landscape: The ReSec Helium Manufacture, ReSec Vertical Red Manufacture, and ReSec Obsidian Manufacture. These aren't just watches; they are marvels of engineering and design, crafted to push the very limits of horological artistry – all powered by the new Chronoswiss Manufacture Movement C.6005.