Chronoswiss is proud to announce the launch of the Neo Digiteur Chronos, an extraordinary evolution of one of the brand’s most unconventional creations. Inspired by the original handless Digiteur introduced in the early 2000s by founder Gerd-Rüdiger Lang, this edition transforms a radical mechanical rebellion into a sculpted gold masterpiece. Housed in a tailored 48mm x 30mm rectangular case made from solid 5N gold (65g) and completely hand-engraved at the Atelier Lucerne, the watch depicts Chronos—the ancient Greek god of time—holding a mythological hourglass.

Rather than utilizing a traditional dial, the watch seamlessly integrates three precise apertures into the sculpted gold scene. The passage of time is visually poetized: the jumping hour appears in Chronos’ scythe at 12 o'clock, the sweeping minute disc flows through the upper chamber of the hourglass, and the continuous seconds rotate below in the lower chamber. Encircling the entire case and printed inside the black nubuck strap is a classic Greek meander pattern, an ancient symbol representing eternity and the infinite flow of time

At the heart of this handless digital regulator is the hand-wound Chronoswiss Caliber C.85757, equipped with an in-house developed jumping hour module. Visible through the rectangular sapphire crystal caseback, the movement operates at 3 Hz with a 48-hour power reserve and features exquisite rhodium plating, radial Côte de Genève, and hand-guilloché wheel bridges executed in Lucerne. Completed with a 5N gold pin buckle (4g), every technical detail underscores the brand's commitment to expressive high horology.

Strictly limited to only 33 pieces worldwide, each Neo Digiteur Chronos requires weeks of painstaking hand engraving, ensuring no two pieces are ever completely identical. As a rare fusion of ancient mythology, traditional hand craftsmanship, and avant-garde watchmaking, this collector’s creation represents a mechanical myth carved in gold. The Neo Digiteur Chronos is now available for inquiry through authorized Chronoswiss retailers and official channels.

View Watch Gallery

 

          

Independent Swiss watchmaker Armin Strom proudly presents the Gravity Equal Force Ultimate Sapphire Rose Gold, a timepiece that exemplifies the brand’s commitment to horological innovation, artisanal craftsmanship, and visual harmony.

Encased in 18K rose gold, this limited-edition watch features a sculptural movement architecture that plays with tone and texture. A brown guilloché mainplate, rose gold-colored bridges, and a floating off-centre sapphire dial create a refined and coherent composition. The watch is paired with a matte brown nubuck leather strap, adding an earthy elegance to the overall aesthetic.

At the heart of the timepiece is the Caliber ASB19, Armin Strom’s groundbreaking automatic movement. It incorporates a patented stop-work declutch mechanism and Geneva cross within the barrel, ensuring consistent torque delivery throughout its 72-hour power reserve. A micro-rotor enables efficient winding while preserving the symmetry and visibility of the movement — a hallmark of Armin Strom’s design philosophy.

Every component, visible or hidden, is hand-finished to haute horology standards. Techniques such as beveling, straight-graining, perlage, Geneva stripes, and black-polished screws are applied with precision and care. The mainplate features a “grain d’orge” guilloché pattern, crafted by master artisan Kari Voutilainen using a traditional hand-operated machine.

This exceptional timepiece is limited to just 25 pieces per year, making it a rare and radiant statement in the world of independent watchmaking. It is a testament to Armin Strom’s philosophy: Mechanics First. Always.

This exceptional timepiece is limited to just 25 pieces per year, making it a rare and radiant statement in the world of independent watchmaking. Priced at CHF 39,400, it is a testament to Armin Strom’s philosophy: Mechanics First. Always.

View Watch Gallery

 

Armin Strom has masterfully fused its revolutionary resonance technology with a bold, contemporary aesthetic in the new Mirrored Force Resonance Red. Limited to just 15 pieces worldwide, this rare masterpiece introduces a striking off-centre guilloché dial in vibrant red. By pairing traditional hand-crafted artistry with the brand’s signature open-worked design, this timepiece breathes dynamic new energy into Armin Strom's celebrated dual-balance mechanism, creating a captivating dialogue between classic hand-finishing and cutting-edge mechanical architecture.

The brilliant red dial is hand-crafted on a traditional, manually operated rose engine lathe, engraving a radiating pattern that catches and plays with light in captivating reflections. Encircled by black azuré chapter rings and topped with faceted, floating index markers, the dial's layout creates a stark, three-dimensional contrast that maximizes both visual depth and legibility. Housed in a polished 43 mm stainless steel case, the movement's technical architecture is framed by anthracite-coated bridges and paired with a dark grey Alcantara strap—ensuring that the vibrant red dial and the synchronized dance of the resonance mechanism remain the undisputed center of attention.

At the heart of this technical marvel lies the in-house Calibre ARF21, a hand-wound movement that integrates two completely independent movements within a single calibre. Connected via Armin Strom's patented Resonance Clutch, the two opposing balance wheels transfer vibrations to enter and maintain a perfect state of harmonic resonance. This physical synchronization significantly improves chronometric stability and rate consistency over time. To let wearers witness this horological phenomenon in action, a pusher at 2 o'clock activates a flyback mechanism, resetting both independent seconds hands to zero simultaneously so their perfect synchrony can be monitored in real-time.

Every millimeter of the Mirrored Force Resonance Red showcases Armin Strom's uncompromising dedication to haute horology standards, featuring meticulous hand-polished bevels, perlage, circular graining, and mirror-black polished screws. On the reverse side, the main plate features technical inscriptions rendered in three-dimensional relief, rising directly from the metal's surface. As is tradition for the Swiss manufacture, each watch is assembled twice to guarantee absolute precision. For collectors seeking the pinnacle of independent Swiss watchmaking, this 15-piece limited edition represents a perfect harmony of mechanical science and artistic expression.
 

View Watch Gallery

  

Arnold & Son has unveiled its new "Perpetual Moon 41.5 Steel Colours of the Moon" collection, a series of highly exclusive, limited-edition timepieces inspired by the changing celestial hues of Earth's natural satellite. Detailed in the official release document, "ENG_A&S PM 41.5 Steel Colours of the Moon.doc", the collection features three distinct versions—the Blue Moon, Golden Moon, and Red Moon—each celebrating a unique atmospheric or seasonal phenomenon that alters the Moon's appearance and has fascinated civilisations throughout history.

Reinterpreting the iconic Perpetual Moon collection, these new models introduce a 41.5 mm stainless-steel case that balances horological exclusivity with everyday versatility. In a watchmaking first, Arnold & Son has applied a pioneering Physical Vapour Deposition (PVD) treatment directly onto precious mother-of-pearl. This innovative process creates deep, shifting reflections across the dials and moon-phase skies, showcasing the natural organic layers of the material with patterns that recall the flowing grain of Damascus steel.

The astronomical precision of the moon phase is enhanced by Super-LumiNova hidden beneath the colored mother-of-pearl moon disc, accompanied by hand-painted luminescent constellations of Cassiopeia and Ursa Major—a poetic tribute to historical mariners who relied on them for navigation. Bringing this celestial mechanics to life is the in-house A&S1512 manual-winding calibre. This movement provides a generous 90-hour power reserve and displays meticulous luxury finishes, including radiating Côtes de Genève and a secondary moon-phase indicator, all visible through the sapphire crystal case back.

Each of the three references is paired with a matching hand-stitched alligator leather strap and secured with a stainless-steel pin buckle. To maintain their extreme exclusivity, production is strictly limited to just 18 pieces per version.
 

View Watch Gallery