A contemporary expression of classical proportion, revealing the architecture of high watchmaking
 

DANIEL ROTH presents the Extra Plat Rose Gold Skeleton, a new interpretation of one of the Maison’s most emblematic creations. Remaining faithful to the proportions and restrained elegance of the Extra Plat, this latest iteration introduces skeletonisation for the first time in the brand’s modern revival, allowing the inner architecture of the watch to take centre stage.

Conceived in the spirit of La Montre Objet d’Art, the Extra Plat Rose Gold Skeleton preserves the calm geometry of the double‑ellipse case while offering a transparent view into the movement, transforming technical construction into a visual and artistic experience.

The Extra Plat: A signature revisited
Simplicity, when executed with absolute precision, has long been central to the identity of DANIEL ROTH. During the early years of his independent career, Mr. Roth considered the Extra Plat a complication in its own right, favouring it for the technical discipline required to achieve true thinness and perfect proportion.

Defined by its double‑ellipse case and balanced architecture, the Extra Plat became a cornerstone of the Maison’s aesthetic vocabulary in the early 1990s. While Daniel Roth produced skeletonised versions of select complications during that period, the Extra Plat itself was never skeletonised. This new creation therefore marks a respectful yet meaningful evolution, expanding the expressive range of the Extra Plat while remaining faithful to its original spirit.

The DR002SR calibre: a skeletonised rose gold heart
At the centre of the Extra Plat Rose Gold Skeleton is the new manually wound calibre DR002SR, developed and manufactured entirely at La Fabrique du Temps Louis Vuitton under the supervision of master watchmakers Michel Navas and Enrico Barbasini.

Based on the DR002, the DR002SR has been re‑engineered from the ground up specifically for skeletonisation. The bridges and plates have been reshaped to maximise openness and visual clarity, while preserving structural rigidity and chronometric performance. Crafted in solid 18k 5N rose gold, the movement mirrors the warmth of the case and provides an ideal canvas for traditional hand finishing.

Transparency in motion
Skeletonisation is an exercise in reduction and balance. With the DR002SR, DANIEL ROTH brings this principle to its highest expression. The calibre reveals a wealth of hand‑executed details, including numerous hand‑polished internal angles, black‑polished steel components, and meticulously bevelled bridges—finishes that can only be achieved by skilled artisans and never by machine.

Despite its openworked construction, the DR002SR retains a power reserve of 65 hours and a frequency of 4 Hz, underscoring the Maison’s commitment to both technical integrity and timeless aesthetics.

Slim proportions, uncompromised structure
Housed in a 38.6 × 35.5 mm double‑ellipse case crafted in 18k rose gold, the Extra Plat Rose Gold Skeleton measures just 6.9 mm in thickness. This exceptional slenderness ensures that the watch remains true to the Extra Plat philosophy of discreet elegance and effortless wearability.

Produced in extremely limited numbers each year, the Extra Plat Rose Gold Skeleton is intended for collectors who value traditional high watchmaking expressed with clarity, restraint, and depth.

View Watch Gallery

Angelus introduces a new collection that plays with the tension between the circle and openworking. Flying Tourbillon Titanium adopts the architecture of the house’s contemporary case, consisting of a carbon composite container surrounded by a titanium case middle with a notched bezel. Inside, Angelus has installed a new hand-wound movement, the A-310 calibre, equipped with a flying tourbillon at 6 o’clock. Large Arabic numerals float between the sapphire crystal and the PVD-treated bridges, adding rhythm and lightness to Flying Tourbillon Titanium. The inaugural version is clad in blue, from the movement to the flange and the interchangeable alligator-leather and rubber straps.

Time is not just seen—it is heard.

Chronoswiss presents the Q-Repeater Scream and Q-Repeater Blue Note, two extraordinary Quarter Repeater timepieces that merge the sonic beauty of timekeeping with cutting-edge mechanical architecture. The watchmakers from Lucerne have created a bold reinvention of sound, design, and independent watchmaking deeply rooted in Chronoswiss history. Housed in a Grade 5 titanium case, these 42mm skeletonized masterpieces reveal the intricate mechanisms behind their chiming complication. Every press of the 10 o’clock pusher activates the mesmerizing quarter repeater function, where hammers strike to audibly indicate the hours and quarter-hours, making time a true sensory experience. At its core lies a legacy movement, rooted in the vision of Chronoswiss founder Gerd-Rüdiger Lang. First introduced in the 1990s and exclusively produced for Chronoswiss, this legacy caliber has been taken from our archives, meticulously restored, refined, and reborn in the Atelier Lucerne, making these two timepieces an extraordinary link between the past and the future.

What the watchmakers of Lucerne have achieved here is the ultimate evolution—the heart beats with the legacy of the past, carrying its passion and memories, while the body is Modern Mechanical, engineered for the next century and beyond.

Q-Repeater Scream – A Chiming Rebel
This is not your grandfather’s repeater. The Q-Repeater Scream is a wild, untamed spectacle—combining bold design and mechanical precision unlike anything in watchmaking. The multi-level dial is a skeletonized stage and at the same time part of the movement, where CVD-coated bridges in electric blue, orange, and purple hold the Paraiba green minute ring, the floating hour, as well as the small seconds rings. At 1 o’clock, the heart of this spectacle is fully visible: the striking hammers, set to release a mechanical rock concert at the press of a button.

As you can tell by the name already, it’s not just about what you see. It’s about what you hear. Every chime is a scream of innovation, breaking free from the traditions of classical repeater watches. Even the legacy movement itself becomes part of the gig, holding the Super-LumiNova blocks and hand-guilloché bridges—one of which moves when the mechanism is activated, adding to the dynamic energy of the dial. The watchmakers of Lucerne refer to the glowing ceramic blocks as “chicken heads”, a nod to the iconic amplifier knobs found on rock concert stages—designed to crank up the sound and electrify the crowd.

Caged in 42mm of titanium, the Q-Repeater Scream is limited to just 25 pieces. As only very few of the legacy movements exist this might be the final tour of the band. Each piece is a testament to mechanical defiance and unfiltered artistry. A Quarter Repeater like no other— built for collectors who dare to embrace the wild side of watchmaking.

Q-Repeater Blue Note – The Sound of Elegance
For those who seek a symphony rather than rock n roll, the Q-Repeater Blue Note takes a more refined yet equally innovative approach. Inspired by the expressive power of jazz and blues, the navy blue CVD-coated skeletonized dial and bridges which are part of the movement, play on contrasts with a silver hour ring and luminous white Super-LumiNova markers, creating a harmonious composition of mechanics and design.

In music, a blue note is an altered pitch—intentionally deviating from the standard, creating a sound that is richer, deeper, and full of soul. One could say – the Chronoswiss way of making watches – and music. The Q-Repeater Blue Note embodies this philosophy, blending traditional watchmaking with a contemporary edge, offering a timeless yet unconventional melody of time.

Like the Scream, the Blue Note features the multi-level regulator dial, a fully visible quarter repeater mechanism, and a restored historical movement, revised and refined by thewatchmakers in Lucerne. It is a timepiece that doesn’t just mark time—it composes it.

Time Reimagined, Sound Reinvented
The Q-Repeater Scream and Q-Repeater Blue Note stand as testaments to Chronoswiss’ relentless drive to push boundaries. With only 25 pieces per model, these Quarter Repeaters are more than just rare; they are audible declarations of mechanical mastery.

This is not just a watch. It is an experience. A fusion of sound and time, crafted for those who appreciate the extraordinary. Chronoswiss has never followed the expected path. The future of independent watchmaking starts here—with a chime.

In the celestial tapestry of time, 2024 marks the golden jubilee of Christiaan van der Klaauw Astronomical Watches, 50 years adorned with dedication, innovation, and horological brilliance. To commemorate this auspicious occasion, we unveil the mesmerizing CVDK Grand Planetarium Eccentric Manufacture: it is the only mechanical Planetarium watch in the world that displays all 8 planets, showing real time the orbits of Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus and Neptune around the Sun. An exceptional Haute Horlogerie CVDK masterpiece, echoing our enduring commitment to the art of timekeeping.

Biel/Bienne, Switzerland, 26 June 2024: Following the inaugural redesigned One Week First Edition that made its debut in 2023, Armin Strom unveils a new version of the successor to its first-ever manufacture movement with the One Week Manufacture Edition. The highly architectural openworked movement, housed in a sleek and sporty steel case with an integrated bracelet, is now presented in a range of grey and anthracite hues. Limited to 100 pieces, the One Week Manufacture Edition foregoes colour to bring out the beauty of its uniquely constructed manual calibre.

15 years ago, independent watchmaking brand Armin Strom took a major leap that would forever change its trajectory. Realising that the path to true independence lies in mastering every step of the process, it established its very own manufacture in Biel. A year later, the first timepiece produced by its vertically integrated manufacture was unveiled: the One Week. Entirely developed and manufactured in-house and designed with symmetrical harmony in mind, it stood out thanks to its unique movement architecture featuring two barrels that together provide a seven-day power reserve. This milestone marked the beginning of many new calibres and innovations by the Armin Strom manufacture, showcasing their dedication to the science of movement and garnering the admiration and respect of even the most discerning and seasoned collectors.

The new One Week Manufacture Edition completely reimagines this milestone calibre in line with the brand’s recent bolder, more three-dimensional approach to calibre design, all in a sleek and serene execution that further highlights its ingenuity and uniqueness. The mainplate, bridges and parts, visible on the dial thanks to the openworked movement design, are anthracite PVD coated for a striking look.

As Armin Strom founder Serge Michel notes: “Collectors who missed the opportunity to get a first edition of the redesigned One Week will now have another chance. The Manufacture Edition of the new One Week will be limited to 100 pieces.”

Sporty yet classy, this model exudes calmness and serenity with its anthracite tones and the symmetrical harmony of its in-house movement.